CGI Casement Window Series 7300 Installation

The Targa Series 7300 Casement Window designed by CGI features a single action multipoint lock, nesting handle, and stainless steel package including operators and hinges. Our contoured trim adds a touch of elegance to any room.

Model Overview

Available Finishes

that it is typical for anodized finishes to have color variation and dye and processing marks that occur during manufacturing. These are not considered defects or covered under the warranty.

White

 

Two Tone


Glass Colors

Clear

 

Bronze

Gray

mist

Obscure

Solexia

Rain

Dark Gray

Glass Types:

  • 7/16” Laminated
  • 1” Insulated Laminated

Glass Coatings:

Energy efficient Lo-E options

Note: Lo E coatings exhibit certain color characteristics depending on viewing angles, reflected light and time of day. For example, Cardinal LoE 366 exhibits a greenish hue. When Clear glass is coupled with a LoE 366 coating, during certain times of the day the reflected color can appear green from the outside. This LoE 366 coating offers an excellent combination of thermal performance, visible light transmittance, and value. When heat strengthened glass is used, roller wave distortion is an inherent possibility.


Features

  • Stainless steel arm operator with nesting crank handle
  • Stainless steel operator track
  • Hinges with washability features
  • Pair of stainless steel concealed hinges
  • Multipoint lock system with single locking handle
  • Stainless steel keepers
  • Aluminum super-snubber blocks
  • Small operator on units less than 24″, large operator on units 24″ or more

Optional Items

  • Limit Opening Device
  • Flange, Fin and Equal leg frame options
  • Double applied contoured exterior muntins and internal grills between glass

Hardware

  • Recessed Tilt Latches
  • Sweep locks

NOA/Performance

Performance Results
Maximum Water Resistance   9 PSF
Small and Large Missile 54″ x 77″ Ann/Ann

 

54″ x 77″  HS/HS

+60 PSF/ -60 PSF

 

+70 PSF/ -75 PSF

Forced Entry Test (ASTM F588)   Passed
Based on flange frame size.

Energy Values

Energy Values
  U Factor SHGC VT
7/16″ Clear LoE 366 Laminated  0.74 0.25 0.41
7/16″ Gray Laminated  0.74 0.39 0.34
7/16″ Clear Laminated  0.74 0.51 0.60
1″ Insulated Laminated Clear LoE 366 0.29 0.19 0.43
1″ Insulated Laminated Clear LoE 270 0.29 0.25 0.46

Sizes

Commodity Sizes (In Inches)
Width Height Width Height Width Height
19 1/8 26 26 1/2 26 37 26
19 1/8 38 3/8 26 1/2 38 3/8 37 38 3/8
19 1/8 50 5/8 26 1/2 50 5/8 37 50 5/8E
19 1/8 63 26 1/2 63 37 53E
19 1/8 76 26 1/2 76 37 76E
Modular Sizes (In Inches)
WxH WxH WxH
24 x 26 28 x 26 32 x 26
24 x 38 28 x 38 32 x 38
24 x 51 28 x 51 32 x 51
24 x 55 28 x 55 32 x 55
24 x 63 28 x 63 32 x 63
24 x 76 28 x 76 32 x 76

*Sizes shown are for flange frame. Subtract 1” for equal leg frame.