Horizontal Rolling Window Series 7200

The Targa Series 7200 Horizontal Rolling Window designed by CGI features a super smooth rolling action available in sizes up to 111” x 63” in a 3 panel configuration.

Model Overview

Available Finishes

that it is typical for anodized finishes to have color variation and dye and processing marks that occur during manufacturing. These are not considered defects or covered under the warranty.

White

 

Two Tone


Glass Colors

Clear

 

Bronze

Gray

mist

Obscure

Solexia

Rain

Dark Gray

Glass Types:

  • 7/16” Laminated
  • 1” Insulated Laminated

Glass Coatings:

Energy efficient Lo-E options

Note: Lo E coatings exhibit certain color characteristics depending on viewing angles, reflected light and time of day. For example, Cardinal LoE 366 exhibits a greenish hue. When Clear glass is coupled with a LoE 366 coating, during certain times of the day the reflected color can appear green from the outside. This LoE 366 coating offers an excellent combination of thermal performance, visible light transmittance, and value. When heat strengthened glass is used, roller wave distortion is an inherent possibility.


Features

  • Two & three panel configurations OX,XO,XOX
  • Equal lites or 1/4-1/2-1/4 configurations
  • 1/2″ flange frame
  • 3 1/4″ frame depth
  • Snap-on glazing beads
  • Strong structural glazing
  • Concealed installation fasteners
  • Aluminum reinforced sash
  • Extruded screen frame with Super-View fiberglass mesh
  • Capture-lock sash system

Optional Items

  • Flange, fin & equal leg frame options
  • Double applied contoured exterior muntins and internal grills between glass

Hardware

  • Sweep Locks (over +60/-60 PSF)
  • Snap Lock

NOA/Performance

Performance Results
Maximum Water Resistance   9 PSF
Small and Large Missile 2 panel 74 3/4″” x 63″ Ann/Ann

 

 

2 panel 74 3/4″” x 63″ HS/HS

+60 PSF/ -60 PSF

 

 

+70 PSF/ -75 PSF

3 panel 111″ x 63″ Ann/Ann

 

 

3 panel 111″ x 63″ HS/HS

+60 PSF/ -60 PSF

 

 

+70 PSF/ -75 PSF

Forced Entry Test (ASTM F588)   Passed
1/4-1/2-1/4 option at 111″ x 63″ +60/-60 PSF with both sweep and snap locks

 

Based on flange frame size.


Energy Values

Energy Values
  U Factor SHGC VT
7/16″ Clear LoE 366 Laminated 0.81 0.27 0.45
7/16″ Gray Laminated 0.81 0.43 0.37
7/16″ Clear Laminated 0.81 0.55 0.65
1″ Insulated Laminated Clear LoE 366 0.28 0.21 0.47
1″ Insulated Laminated Clear LoE 270 0.28 0.27 0.51

Sizes

Commodity Sizes XO or OX (In Inches)
Width Height Width Height Width Height
26 1/2 26 37 26 53 1/8 26
26 1/2 38 3/8 37 38 3/8 53 1/8 38 3/8
26 1/2 50 5/8 37 50 5/8 53 1/8 50 5/8E
26 1/2 63 37 63 53 1/8 63E
Modular Sizes XO or OX (In Inches)
WxH WxH WxH WxH WxH WxH WxH
36 x 26 48 x 26 54 x 26 60 x 26 66 x 26 72 x 26 74 x 26
36 x 38 3/8 48 x 38 3/8 54 x 38 3/8 60 x 38 3/8 66 x 38 3/8E 72 x 38 3/8E 74 x 38 3/8E
36 x 50 5/8 48 x 50 5/8 54 x 50 5/8E 60 x 50 5/8E 66 x 50 5/8E 72 x 50 5/8E 74 x 50 5/8E
36 x 54 48 x 54 54 x 54E 60 x 54E 66 x 54E 72 x 54E 74 x 54E
36 x 63 48 x 63 54 x 63E 60 x 63E  66 x 63E 72 x 63E 74 x 63E

*Sizes shown are for flange frame. Subtract 1” or equal leg frame. E= Meets clear opening egress requirements at 5.7 sq. ft.

Commodity Sizes XOX (In Inches)
Width Height Width Height Width Height Width Height
53 /18 26 74 26 106 3/8 26 111 26
53 1/8 38 3/8 74 38 3/8 106 3/8 38 3/8E 111 38 3/8E
53 1/8 50 5/8 74 50 5/8E 106 3/8 50 5/8E 111 50 5/8E
53 1/8 63 74 63E 106 3/8 63E 111 63E
Modular Sizes XOX (In Inches)
WxH WxH WxH WxH WxH WxH WxH
48 x 26 60 x 26 72 x 26 74 x 26 84 x 26 96 x 26 108 x 26
48 x 38 3/8 60 x 38 3/8 72 x 38 3/8 74 x 38 3/8 84 x 38 3/8 96 x 38 3/8E 108 x 38 3/8E
48 x 50 5/8 60 x 50 5/8 72 x 50 5/8 74 x 50 5/8 84 x 50 5/8E 96 x 50 5/8E 108 x 50 5/8E
48 x 54 60 x 54 72 x 54 74 x 54 84 x 54E 96 x 54E 108 x 54E
48 x 63 60 x 63 72 x 63 74 x 63 84 x 63E  96 x 63E 108 x 63E

*Sizes shown are for flange frame. Subtract 1” or equal leg frame. E= Meets clear opening egress requirements at 5.7 sq. ft.